Description
Energy sources MultiJack provide operation of sparker and boomer sound sources that are used in geophysical surveys in the water area with Continuous Seismoacoustic Profiling (СSP), High Resolution or Ultra High Resolution Seismics (HRS / UHRS) and VSP.
In addition to supporting the standard mode of operation with a single source, MultiJack energy sources allow to work in an array for successful fulfilment of the latest technologies:
- Flip-flop mode
- Multi-level source
- Simultaneous source
- Coded shooting
The use of multilevel sources allows to achieve a certain source directivity, to control the spectral composition of the generated signal and to modify the pulse shape (the source signature). The application of multilevel sources in conjunction with impulse-code sequences makes it possible to use a ghost wave as a source of useful signal. The use of code sequences also makes it possible to work with amplitudes of generated signals that are much smaller than the source signals amplitudes in a standard seismic survey with a single excitation of the signal at each shot point. At the same time, the total energy of the recorded signal is preserved without loss in data quality.
Deploying the simultaneous source (or multi-shooting) technology allows to get a number of significant advantages in comparison with use of single sources:
An important feature of MultiJack system when working in an array is its exceptional simplicity — all units are controlled by a single MultiJackPad remote control that allows to configure the operating mode of such energy source including determining the interval between shots and their energy, indicating the constant and accidental response delays, generating code sequences, charge rate adjustment (power consumption) and testing of the entire system or each individual unit. In addition, MultiJack energy sources are balanced by the maximum pulse energy and charge rate so that it is guaranteed to provide standard observation steps at a typical vessel speed of 3–5 knots.
- MultiJack Unit
- Sync connector (2 pc.)
- Power cable
- Universal switching module for connecting the source
- Documentation Kit
- MultiJackPad remote control
- Spare parts kit
- Towed sparkers and boomers
- Seismic stations
- Towed hydrophone arrays
As may be agreed, it is possible to manufacture a energy source and a source of the required power and configuration. For the correct preparation of technical design specification, please contact us using any method indicated on the website.
Specification
| MultiJack model | 500HP1.5 | 1250HP1.5 | 2500HP3.0 | 5000HP6.0 | 10000HP12 | 25000HP12 | 50000HP12 |
| Maximum pulse voltage, kV | 4 | ||||||
| Type of charger | pulse charger | ||||||
| Trigger mode | external/repetitive/manual | ||||||
| Support of survey technologies | Conventional, Flip-flop, Simultaneous Source, Coded and Multi-level source | ||||||
| Operating energy, J | 50-500 | 300-1 250 | 300-2 500 | 300-5 000 | 300-10 000 | 300-25 000 | 300-50 000 |
| Charging rate, J/s | 1 500 | 1 500 | 3 000 | 6 000 | 12 000 | 12 000 | 12 000 |
| Minimum period of operation at the minimum pulse energy, s | 0.2 | 0.5 | 0.3 | 0.2 | 0.2 | 0.2 | 0.2 |
| Minimum period of operation at the maximum pulse energy, s | 0.5 | 1 | 1 | 1 | 1 | 2.2 | 4.3 |
| Minimum distance between shot points on maximum pulse energy and vessel speed is 3-5 knots, m | 0.7-1.2 | 1.5-2.5 | 1.5-2.5 | 1.5-2.5 | 1.5-2.5 | 3.4-5.6 | 6.6-11 |
| Power mains | 110 or 220 V, 50 Hz | 380 V, 50 Hz | |||||
| Maximum power consumption, kW | 1/2/3 | 1/2/3 | 1/2/3/4/5/6 | 12 | 12/24 | ||
| Overall dimensions, sm | 54×41×27 | 58×56×50 | 58×59×69 | depends of customization | |||
| Weight, kg | 20 | 26 | 74 | 99 | depends of customization | ||
| Device model | MultiJackPad |
| Purpose of use | remote control of MultiJack |
| Maximum length of communication line, m | 100 |
| Overall dimensions, sm | 24 × 19.8 × 10.9 |
| Weight, kg | 1.5 |
The manufacturer reserves the right to make changes in the design of devices that do not significantly alter the functional characteristics of the product.
Processing Software
RadExPro
ZondST2d — 2D seismotomography interpretation (refracted waves)
ZondST3d — 3D seismotomography interpretation (refracted waves)
Reviews
There are no reviews yet.